RFX RACE KILL BUTTON, BLK 1128607

Popis produktu

<p>RFX Race Series kill buttons are an exact OEM replacement part.</p>
<p>Complete with the same couplings, fasteners, connectors and exact cable lengths as the genuine part.</p>
<p>Available for a wide variety of bikes.</p>
<p><strong>Features:</strong></p>
<ul>
<li>OEM replacement</li>
<li>Accepts all original connectors</li>
<li>OEM cable length</li>
</ul>
<p><strong>Fitting Instructions:</strong></p>
<ul>
<li>Start by removing the front number plate.</li>
<li>Carefully snip any cable ties holding the start and stop switch cables to the bars then un-screw the clamps and let these hang down.</li>
<li>Locate the connector for the switch on the bike, these are often close by to the headstock on the chassis but sometimes can be under the tank.</li>
<li>Unclip the connector and remove the switch taking a note of the routing for the wiring.</li>
<li>Clean the connector using an electrical contact cleaner.</li>
<li>Loosely attach the new switch on to the handlebars in the desired position.</li>
<li>Route the wires as per the old switch and clip the connector together.</li>
<li>Check all free pay in the wires by turning the bars to full extension and making sure the wires don&rsquo;t pull tight, adjust if necessary.</li>
<li>Re-fit cable ties to the wires if possible positioning the cables to the back of the bars to prevent damage from roost.</li>
<li>Re-fit your number plate</li>
</ul>